banner
Home / Blog / CZ 600 Range
Blog

CZ 600 Range

Jun 09, 2023Jun 09, 2023

The CZ 600 Range immediately looked an exciting and adventurous rifle from the instant I first saw one. It’s designed for shooters for whom precision is the priority and carries the most stringent accuracy guarantee of sub-0.75 MOA (using match ammunition) within the entire 600 portfolio.

An 18x1 thread tips the recessed crown on the 22-mm diameter barrel. This is 610-mm or 24” long and cold hammer forged by CZ with 4 grooves turning once every ten inches.

The barrel shows a blacked chemical finish and runs parallel towards the laminated stock’s beavertail forend which has a spacious barrel channel with enough clearance for a fully floating tube in all circumstances.

Although the CZ 600 rifles are modular, this one specifically uses the stiffer steel action in no.2 specification which represents standard length cartridges. It has four threaded holes atop to attach a Picatinny rail. The bolt has six lugs/60-degree lift to cock on opening, the shaft has a single anti-rotation groove coupled to a right-side release catch for removal.

The safety catch sits recessed into the stock behind the bolt’s tang, push it down for fire or press it back up for safe by accessing it behind the trigger guard on the underside.

The bolt is locked on safe and if you do want to open while “safe”, just press the bolt release catch and it will open smoothly for safe removal of loaded rounds.

The bolt handle is slim with a spherical tip for fast intuitive operation. The action feeds ammunition to the chamber from a detachable 5-round polymer magazine, plus one in the chamber if needed. It’s a twin column unit so can be loaded in or out of the gun and helpfully allows single rounds dropped through the ejection port to be fed straight into the chamber.

The mag push button release catch is on the underside to drop the magazine into your waiting hand under its own weight. You can lock the magazine into the rifle by sliding rather then pressing the magazine catch which is a useful function to avoid loss.

CZ’s trigger breaks crisply in a single stage with a silver 5-mm blade. There is a small Allen screw in front/above the trigger blade with a white spot on it and this is easily accessed with an Allen key. It alters the trigger weight from 600-1350 grams in four stages, each of which has a repeatable click allowing it to be changed repeatably whenever it suits you.

The bolt heads are interchangeable when removed from of the rifle and de-cocked, you can withdraw the firing pin and then with the pressure removed from the sprung ejector, the bolt head slides out.

CZ originally intended to make this a switch barrel rifle but decided to limit this to a dealer only service to avoid user error.

Three screws clamp the barrel in place and are threadlocked in place unlike the initial samples, but the system leaves me with no doubts. The ejector is manual so how far your brass is thrown from the gun is based on your operation speed. It was totally reliable in use and works well with a semi-controlled feed bolt face and single extractor claw to assure plentiful primary extraction force as the bolt cams open.

Both left and right-sides of the laminated stock’s forend tip show finger grooves with stippling as well as recessed QD sling stud anchor points. There are two conventional sling studs on the underside to enable bipod fitting in your preferred location and everything is solidly anchored. Weight savings and some cooling benefits are catered for with a large cutout in the stock, there is no compromise in stiffness and the rifle can still be clamped on a tripod without any loss in zero.

The pistol grip is symmetric with a slight right side palm swell and stippling, and it has a spacious reach to trigger with blade to throat length of approximately 90 mm.

The stippling offers a deluxe feel, and you can wrap your thumb over the grip or shoot with it vertically upward behind the bolt shroud. You can lift the bolt open with a slick upward flick of your fingers which causes the lease amount of disruption to the rifle’s stability and consequent aim on target for a fast reload and follow up shot.

The comb rises 30mm from the stock without needing tools and its slender profile fits under your cheekbone without excessive jaw displacement. A 4.6kg, .308 rifle doesn’t develop much recoil and the CZ also avoids vibration transfer.

The Range has a butt hook and retains satisfactory free space behind the grip to allow movement in the rifle under recoil without hitting the back of your supporting hand.

Being able to hold the rifle into your shoulder with that underside supporting hand significantly contributes to more stable rifle handling between shots while reloading and a factor quite a few rifles attempt to deliver but actually get the proportions completely wrong.

There is a short Picatinny rail on the underside which could be used for a Monopod, and it’s supplied with a rubber protector for comfort or when used as a bag rider without snagging. Length of pull is generous at 373 mm/14.7” and there is a solid 25-mm medium firm rubber recoil pad.

CZ offer a 0.75 MOA assurance using Match ammunition, so the first step was to see how easy that was to prove. I zeroed the gun, cleaned it again and it was very straightforward, the next three groups shot from a bipod at 100 metres delivered 5 rounds sub ¾ with Hornady 168gr Match ELD-M ammunition. The rifle was very stable from the bipod or bench, remained quite stable during firing with recoil directed flat through to my shoulder with minimal muzzle jump. I shot the gun with a bare muzzle and moderated and of course the moderator calmed it even more. Magazine operation is smooth and easy to load, there is no damage imparted to any bullets through the chambering cycle and this also helps aid consistency.

Within the 600 series, this rifle’s specification, materials, and design choices certainly deliver excellent performance on target. It shares all the great magazine and trigger features of other 600’s which I have reviewed before yet excels due to the heavier target stock with longer support structure, heavier barrel, and only currently offering chamberings for cartridges where only match ammunition is promoted. It was a pleasure to shoot and didn’t need any special attention to fulfil its accuracy promises. I’m very surprised no 6.5 Creedmoor option was offered from the very start though as it is the darling of the shooting world at present (according to the CZ website).

24”/ 610 mm long, 1:10” twist rate, 4 grooves (0.860”/22 mm)

Contact

www.sportsmanguncentre.co.uk

Ammunition used

Hornady, www.edgarbrothers.com

Sierra Bullets, www.henrykrank.com

Vihtavuori powder and Lapua Brass, www.hannamsreloading.co.uk

Magtech Primers, www.vikingarms.com

cold hammer forged fully floatingfour threaded holes atop to attach a Picatinny rail.The bolt has six lugs/60-degree lift to cock on opening, detachable 5-round polymer magazine,CZ’s trigger breaks crisply in a single stage with a silver 5-mm blade. trigger weight from 600-1350 grams in four stages, bolt heads are interchangeabletotally reliable in use and works well with a semi-controlled feed bolt face and single extractor claw laminated stock’s The stippling offers a deluxe feel,The comb rises 30mm from the stock without needing tools butt hooka short Picatinny rail on the undersideLength of pull is generous at 373 mm/14.7” and there is a solid 25-mm medium firm rubber recoil pad.AmmunitionBullet weight/grStated velocity on box /fpsAverage velocity recorded/fpsMuzzle energy ft-lbsBest 100 m 5-shot group/mmBest 100 m 5-shot group/inchesMOACZ offer a 0.75 MOA assurance using Match ammunition,sub ¾ with Hornady 168gr Match ELD-M ammunition. Magazine operation is smooth and easy to load, this rifle’s specification, materials, and design choices certainly deliver excellent performance on target.It was a pleasure to shoot ContactAmmunition used